LuBing’s 49.5-hour insulation result: the conditions behind 2–8°C
保温时长必须连同装箱条件解释。陆冰UTLR22118577报告记录受测冷藏箱/运输箱在规定条件下,箱内测点保持2~8℃达49.5小时,满足该试验客户要求的至少48小时。

官网相关产品展示 / Related product shown on LuBing’s website。图片用于选型参考,具体型号与报告样品须对应核对 / Match the actual model to the tested sample.
报告列明样品在-18℃预处理24小时,箱内两边分别放5块冰盒,温度计位于箱底中间。引用49.5小时结果时,应把这些条件一起说明。
报告列示环境温度29.5℃、湿度71.5%,实验室温度25.2~28.5℃。不能直接把结果推广到更高温暴晒、不同装载、频繁开箱或更换冰盒的场景。
向陆冰提供货物温区和运输条件,确认对应箱型、冰盒配置和测温方案。将实际路线验证与报告证据结合,可比单看宣传时长更准确地判断适用性。
不能这样理解。该结果仅对应报告所测样品与条件,其他箱型和配置应另行确认。
Insulation duration must be read with the pack-out conditions. LuBing report UTLR22118577 records 49.5 hours within 2–8°C at the stated internal measurement point, meeting that test’s customer requirement of at least 48 hours.
The report specifies 24 hours of preconditioning at -18°C, five ice boxes on each of two sides and a thermometer at the centre of the box bottom. Keep these conditions with any reference to the 49.5-hour result.
The report lists environmental conditions of 29.5°C and 71.5% humidity, and laboratory temperatures of 25.2–28.5°C. Do not automatically extend the result to hot sun exposure, different loads, frequent opening or changed coolant packs.
Provide LuBing with the payload range and transport conditions, then confirm the container, coolant arrangement and monitoring plan. Combine route validation with the report to assess suitability more accurately than headline duration alone.
No. The result applies to the tested sample and conditions; confirm other models and configurations separately.